Onboard Serial Port 2; Uart Mode Select; Onboard Parallel Port; Parallel Port Mode - Gigabyte GA-8IP900MK User Manual

Onboard Serial Port 2

Auto
3F8/ IRQ4
2F8/ IRQ3
3E8/ IRQ4
2E8/ IRQ3
Disabled

UART Mode Select

This item allow s y ou to determine w hich Infra Red(IR) function of Onboard I/O chip.
Normal
IrDA
ASKIR
SCR
UR2 Dupl ex Mode
This feature allow s y ou to sec lect IR mode.
This function w ill av ailable w hen "UART Mode Select" does n't set at Normal/SCR.
Half
Full

Onboard Parallel port

This feature allow s y ou to select from a giv en set of parameters if the parallel port uses the onboard
I/O controller.
Disabled
378/ IRQ7
278/ IRQ5
3BC/ IRQ7

Parallel Port Mode

This feature allow s y ou to connect w ith an adv anc ed printer v ia the port mode it supports.
SPP
EPP
ECP
ECP+EPP
GA-8IP900MK Motherboard
8ip900mk_1001_b.p65
BIOS w ill autom atically s etup the port 2 address.
Enable onboard Serial port 2 and address is 3F8.
Enable onboard Serial port 2 and address is 2F8. (Default v alue)
Enable onboard Serial port 2 and address is 3E8.
Enable onboard Serial port 2 and address is 2E8.
Disable onboard Serial port 2.
Set onboard I/O chip UAR T to Norm al Mode. (Default Value)
Set onboard I/O chip UAR T to IrDA Mode.
Set onboard I/O chip UART to ASKIR Mode.
Set onboard I/O chip U ART to SCR Interface.
IR Function Duplex Half. (Default Value)
IR F unction Duplex F ull.
Disable onboard LPT port.
Enable onboard LPT port and address is 378/IRQ7. (Default Value)
Enable onboard LPT port and address is 278/ IRQ5.
Enable onboard LPT port and address is 3BC/ IRQ7.
Using Parallel port as Standard Parallel Port. (Default Value)
Using Parallel port as Enhanced Parallel Port.
Using Parallel port as Ex tended Capabilities Port.
Using Parallel port as ECP & EPP mode.
- 44 -
44 2003/4/22, 下午 03:54