Table of Contents
Advertisement
2.
While pressing the lock lever, turn the undercover
counterclockwise until
with
on the lock lever.
3.
Remove the undercover.
4.
Loosen two screws with a screwdriver and remove
the shear blades.
on the undercover is aligned
► 1 . Screws
NOTE: The shear blades can be removed without
removing the screws.
5.
Remove the crank from the shear blades.
► 1 . Crank
NOTE: The crank may remain in the tool.
NOTE: Attach the blade cover and the storage case
to the removed shear blades, and then store the
blades.
Installing shear blades
1.
Prepare the crank, undercover, and new shear
blades.
1
► 1 . Crank 2. Undercover 3. Shear blades
12 ENGLISH
1
1
2
3
Advertisement
Table of Contents
