Makita DUM604SFX Instruction Manual page 10

3. Remove the undercover, shear blades, and crank.
► 1 . Undercover 2. Shear blades 3. Crank
Installing the shear blades
1. Prepare the crank, undercover, and new shear
blades.
1 2
► 1 . Crank 2. Undercover 3. Shear blades
2. Remove the blade cover from the old shear
blades, and then attach it to the new ones.
3.
the alignment line.
1
2
3
► 1 . Alignment line
4.
of the crank. Attach the crank to the pins with the small
and large rounds facing up.
3
► 1 . Crank
5.
in the base plate and the two protrusions on the blades
are lined up.
10 ENGLISH
Adjust the three pins so that they are lined up on
Apply a small amount of grease to the periphery
Adjust the blades and base plate so that the hole
1
1