Table of Contents
Advertisement
6.
Turn the shear blades upside down and install
them so that the pins on the tool fit in the hole on the
base plate. Make sure that the shear blades are fixed
securely in place.
7.
Place the undercover so that
cover is aligned with
8.
While pressing the undercover, turn the under-
cover clockwise until
with
on the lock lever.
on the under-
on the lock lever.
on the undercover is aligned
9.
Make sure that the lock lever fits in the groove on
the undercover.
1
► 1 . Lock lever
CAUTION:
Never use the tool without install-
ing the undercover.
10. Remove the blade cover, and then turn on the tool
to check that it works properly.
NOTICE:
If the shear blades do not operate prop-
erly, the blades are not engaging the crank prop-
erly. Remove the blades and install them again.
Installing or removing shear blades
for hedge trimmer
Optional accessory
CAUTION:
Attach the blade cover before
removing or installing the shear blades.
Removing shear blades
1.
Place the tool upside down.
11 ENGLISH
Advertisement
Table of Contents
