Gigabyte GA-8IE2004P User Manual page 50

FPCI/AGP Fixed
8You can choose those mode to adjust PCI/AGP frequency. (Select PCI/AGP frequency asynchronous
with CPU frequency).
FHost/DRAM Clock Ratio
or FSB(Front Side Bus) frequency=400MHz,
Memory Frequency = Host clock X 2.0.
82.0
Memory Frequency = Host clock X 2.66.
82.66
Set Memory frequency by DRAM SPD data. (Default value)
8Auto
for FSB(Front Side Bus) frequency=533MHz,
Memory Frequency = Host clock X 2.0
82.0
Memory Frequency = Host clock X 1.5.
81.5
Set Memory frequency by DRAM SPD data. (Default value)
8Auto
for FSB(Front Side Bus) frequency=800MHz,
Memory Frequency = Host clock X 2.0
82.0
Memory Frequency = Host clock X 1.5.
81.5
Set Memory frequency by DRAM SPD data. (Default value)
8Auto
FMemory Frequency(Mhz)
8The values depend on CPU Host Frequency(Mhz) .
F PCI/AGP Frequency(Mhz)
8Setup PCI/AGP frequency by adjusting CPU Host Frequency or Fixed PCI/AGP Frequency item.
FCPU OverVoltage Control
Increase CPU voltage may get stable for Over_Clock. But it may damage to CPU when enable this feature.
Supply voltage as CPU reguired. (Default value)
8Normal
8+5% / +7.5% / +10% Increase voltage range as user selected.
FAGP OverVoltage Control
Increase AGP voltage may get stable for Over_Clock. But it may damage to AGP Card when enable this
feature.
Supply voltage as AGP Card reguired. (Default value)
8Normal
Set AGP voltage from 1.6V~1.8V.
8+0.1V~+.03V
FDIMM OverVoltage Control
Increase DRAM voltage may get stable for Over_Clock. But it may damage to DRAM module when enable this
feature.
Supply voltage as DRAM module reguired. (Default value)
8Normal
Set DIMM voltage from 2.6V~2.8V.
8+0.1V~+.03V
GA-8IE2004P(-L) Motherboard
.
.
- 46 -