Gigabyte GA-8IE2004P User Manual page 10

On-Board USB 2.0
On-Board LAN*
PS/2 Connector
BIOS
Hardware Monitor
Additional Features
Overclocking
* For GA-8IE2004P-L only
HT functionality requirement content :
Enabling the functionality of Hyper-Threading Technology for your computer system requires all
of the following platform components:
®
- CPU: An Intel Pentium 4 Processor with HT Technology
®
- Chipset: An Intel Chipset that supports HT Technology
- BIOS: A BIOS that supports HT Technology and has it enabled
- OS: An operation system that has optimizations for HT Technology
Please set the CPU host frequency in accordance with your processor's specifications.
We don't recommend you to set the system bus frequency over the CPU's specification
because these specific bus frequencies are not the standard specifications for CPU,
chipset and most of the peripherals. Whether your system can run under these specific
bus frequencies properly will depend on your hardware configurations, including CPU,
Chipsets,SDRAM,Cards....etc.
GA-8IE2004P(-L) Motherboard
— Built in ICH4 Chipset
— Builit in Realtek 8100C
— 1 RJ45 port
— PS/2 Keyboard interface and PS/2 Mouse interace
— Licensed AWARD BIOS
— Supports Q-Flash
— CPU/System Fan Revolution detect
— CPU/System Fan Fail Warning
— CPU Overheat Warning
— System Voltage Detect
— PS/2 Keyboard power on by password
— PS/2 Mouse power on
— External Modem wake up
— STR(Suspend-To-RAM)
— AC Recovery
— Poly fuse for keyboard over-current protection
— USB KB/Mouse wake up from S3
— Supports @BIOS
— Supports EasyTune 4
— Over Clock (CPU/DDR/AGP/PCI) by BIOS
— Over Voltage (CPU/DDR/AGP) by BIOS
- 6 -