Gigabyte GA-8IE2004P User Manual page 49

Frequency/Voltage Control
CMOS Setup Utility-Copyright (C) 1984-2003 Award Software
CPU Clock Ratio
CPU Host Clock Control
øCPU Host Frequency(MHz)
øPCI/AGP Fixed
Host/DRAM Clock ratio
Memory Frequency(MHz)
PCI/AGP Frequency(MHz)
CPU OverVoltage Control
DIMM OverVoltage Control
AGP OverVoltage Control
higf: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
øThose items will be available when "CPU Host Clock Control" is set to Enabled.
FCPU Clock Ratio
This setup option will automatically assign by CPU detection.
For Willamette CPU:
8X~23X default: 14X
For C-Stepping P4:
8X,10X~24X default: 15X
For Northwood CPU:
12X~24X default: 16X
The option will display " Locked" and read only if the CPU ratio is not changeable.
FCPU Host Clock Control
Note: If system hangs up before enter CMOS setup utility, wait for 20 sec for times out reboot . When
time out occur, system will reset and run at CPU default Host clock at next boot.
Disable CPU Host Clock Control.(Default value)
8Disable
Enable CPU Host Clock Control.
8Enable
FCPU Host Frequency (MHz)
8100MHz ~ 355MHzSet CPU Host Clock from 100MHz to 355MHz.
Frequency/Voltage Control
[ 15X]
[Disabled]
100
33/66
[Auto]
266
33/66
[Normal]
[Normal]
[Normal]
F6:Fail-Safe Defaults F7:Optimized Defaults
Figure 8: Frequency/Voltage Control
- 45 -
Item Help
Menu Level
BIOS Setup