Table of Contents
Advertisement
English
2
Safety Information
The lightning flash with arrowheard within an equilateral triangle
is intended to alert the user to the presence of uninsulated "danger-
ous voltage" within the product's enclosure that may be of suf-
ficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of import operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH
VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE
CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Class B emissions limits
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Important Safety Instruction
1. Read these instructions –before using this projector.
2. Keep these instructions –for future reference.
3. Follow all instructions.
4. Install in accordance with the manufacturer's instructions :
A. Do not block any ventilation openings. To ensure reliable
operation of the projector and to protect it from overheating, put
the projector in a position and location that will not interfere with
its proper ventilation. For example, do not place the projector on
a bed, sofa, carpet, or similar surface that may block the ventila-
tion openings. Do not put it in an enclosure, such as a bookcase or
a cabinet that may keep air from flowing through its ventilation
openings.
B. Do not use this projector near water or moisture. To re-
duce the risk of fire or electric shock, do not expose the projector
to rain or moisture.
C. Do not install near any heat sources, such as radiators, heat-
ers, stoves or other apparatus (including amplifiers) that produce
heat.
5. Clean only with a dry cloth.
6. Only use attachments/accessories specified by the manufacturer.
7. Refer all servicing to qualified service personnel. Servicing is re-
quired when the projector has been damaged in any way:
Such as power supply cord or plug is damaged.
Liquid has been spilled or objects have fallen into the appara-
tus.
The projector has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Do not attempt to service this projector yourself. Opening or
removing covers may expose you to dangerous voltages or other
hazards. Please call Optoma to be referred to an authorized service
center near you.
8. Do not let objects or liquids enter the projector –as they may touch
dangerous voltage points or short-out parts that could result in a
fire or electric shock.
9. See projector enclosure for safety related markings.
10. The projector should not be adjusted or repaired by anyone except
properly qualified service personnel.
Table of Contents
Advertisement
Table of Contents
