Sony UBP-X1000ES Operating Instructions Manual page 29

Ultra hd blu-ray / dvd player
Hide thumbs Also See for UBP-X1000ES:
Table of Contents

Advertisement

Others
Playback does not start from the beginning
of content.
• Press OPTIONS, and select [Play from start].
Playback does not start from the resume
point where you last stopped playing.
• The resume point may be cleared from
memory depending on the disc when
– you open the disc tray.
– you disconnect the USB device.
– you play other content.
– you turn off the player.
Message Code 1 [Playback stopped. The
content being played is protected by
Cinavia and is not authorized for playback
on this device. For more information, see
http://www.cinavia.com. Message Code
1.] appears on the screen when playing a
disc.
• The audio track of the video that you are
playing contains a Cinavia code indicating it
was intended for presentation using
professional equipment only and is not
authorised for playback by consumers
(page 36).
The disc tray does not open and "LOCK" or
"D ON" appears on the front panel display.
• When "LOCK" appears, the player is locked.
To cancel the Child Lock, press x (stop),
HOME, and then TOP MENU button on the
remote until "UNLOCK" appears on the front
panel display (page 9).
• When "D ON" appears, contact your Sony
dealer or local authorized Sony service
facility.
The disc tray does not open and you cannot
remove the disc even after you press Z
(open/close).
• While the player is turned on, press x
(stop), HOME, and then TOP MENU button
on the remote to unlock the tray and disable
the Child Lock (page 9).
• Try the following:
Turn the player off, and
1
disconnect the AC power cord.
the AC power cord while pressing down
Z (open/close) on the player.
pressing down Z (open/close) on the
player until the tray opens.
disc.
"Exxxx" or "TEMP" appears on the front
panel display.
• When "Exxxx" appears, contact your
• When "TEMP" appears, place the player in a
The message [[EJECT] Key is currently
unavailable.] appears on the screen after
Z (open/close) is pressed.
• Contact your nearest Sony dealer or local
The player does not respond to any button.
• Moisture has condensed inside the player
Reconnect
2
Keep
3
Remove the
4
nearest Sony dealer or local authorized
Sony service facility and give the error code.
location with adequate ventilation to
prevent heat build-up in the player. "TEMP"
will appear for a short time.
authorised Sony service facility.
(page 4).
GB
29

Advertisement

Table of Contents
loading

Table of Contents