Chapter 3. Connecting Devices To The Projector; Connecting Devices - IBM iLC400 User Manual

Chapter 3. Connecting devices to the projector

This chapter provides information on connecting devices to the C400 projector.

Connecting devices

Computers and video devices can be connected to the projector at the same time.
Refer to the documentation that comes with the connecting device to verify that
the device has the appropriate output connector.
Note: This is a service port and is not intended for personal use.
Note: If your video equipment has both S-video and RCA (composite video) jacks, connect
to the S-video connector for optimal signal quality.
© Copyright IBM Corp. 2004
1 Local Area Network RJ-45
2 RS-232
3 Monitor out
4 DVI-I
5 Composite video
6 S-video
7 Audio-in
8 Audio-out
9 USB
3-1