1. Twist the rings on the projector to adjust the focus 1 and zoom 2 , as shown
2. Use the Keystone buttons on the projector or the remote to correct
Adjusting the volume
To adjust the volume, do the following:
1. Press the Volume +/- buttons on the projector or the remote control. The
below.
image-trapezoid (wider top or bottom) effect. The Keystone buttons on the
remote and projector are shown below.
The keystone control appears on the On Screen Display (OSD), as shown.
volume control appears on the OSD.
Chapter 2. Setting up the projector
2-5