Related Manuals for Brickhouse Security CP2-LTE
Summary of Contents for Brickhouse Security CP2-LTE
- Page 1 2 Channel Dash Telematics Camera CP2-LTE Installation Guide In the Box 1. CP2-LTE Dash Camera 2. Power Cables 3. 2x Keys 4. 2x 3M VHB Pads 5. 2x Alcohol Prep Pads 6. Wiring Harness 7. Power Cable 8. Cord Zip Ties...
- Page 2 Getting Started 1. Peel the cover paper from the 3M Adhesive on the CP2-LTE top. Mount the fully assembled unit to the windshield behind the rearview mirror. Holding the camera in position facing the road with firm pressure for 30 seconds.
- Page 3 3. Connect the CP2-LTE Lead cable to the power adapter, lining up the arrows on the silver cable connectors, and then gently push them together. The power adapter switch can be turned to the ON position. 4. After connecting the power cable to the CP2-LTE power lead, layout the power cable roughly where it will run once hidden behind the vehicle's interior panels.
- Page 4 (small red button to the left of the panic button.) The vehicle should be parked on a flat surface when pressing the G-Sensor Calibrate sensor. 9. There will be a beep and the CP2-LTE LED light will blink briefly to indicate the G-sensor has registered. Connecting Secondary Camera An optional secondary camera can also be added to the CP2-LTE via Channel 2 input.
- Page 5 (small red button to the left of the panic button). The vehicle should be parked on a flat surface when pressing the G-Sensor calibrate button. 5. There will be a beep and the CP2-LTE light will blink briefly to indicate the G-Sensor calibration has registered.