Oster GCSTBS5001 Instruction Manual page 6

WARNING: To prevent the risk of burns, keep your hand away from the area being steamed.
WARNING: DO NOT steam garments while wearing them; this may result in injuries.
• Check the ironing instructions on the label of the items that you wish to iron. Check the temperature setting
table for further instructions.
• Should the specific ironing instructions not appear on the label, follow instructions on the temperature setting
table. This table is only for fabrics indicated and does not apply to special textiles with a gloss finish, etc.
Textiles with special coatings (such as gloss, relief wrinkles, etc.) are best ironed at very low temperatures.
If the textile consists of several different type of fibers, always select the lowest temperature, i.e the
temperature recommended for the most delicate fiber in the composition (for example, if the composition
consists of 60% polyester and 40% cotton, you should iron at the temperature indicated for polyester).
1. Set the iron in on upright position.
2. Connect the Iron to an electrical wall socket.
3. Set the Temperature Control dial (Figure 4) to the correct ironing temperature as
indicated on the lable or the temperature settings table.
The Anti Calc feature helps prevent the build up of mineral deposits in your iron. This prolongs its life and
improves the iron's performance.
Before cleaning the Iron, always make sure that it is disconnected from the electrical wall socket and is
completely cool.
SOLEPLATE
• Residue on the Soleplate can be wiped off with a cloth soaked in a solution of water and vinegar.
• Do not use scouring pads, abrasives or chemical cleaning solvents as they may damage the finish.
HOUSING
• The housing can be cleaned with a moist cloth and then wiped dry.
• Other than the recommended cleaning, no further user maintenance should be necessary. If for any reason
your Steam Iron should require repairs, do not try to fix it yourself. Send it to an Authorized Service Center
(please refer to the warranty included in the box).
1. Turn off the iron and disconnect the plug from the electrical wall socket.
2. Set the Iron in an upright position and let it cool down completely.
3. Set the Steam Select Switch to the closed position
4. Empty out all the water remaining in the Water Reservoir by opening the Water Reservoir Lid and inverting
the Iron over the sink.
5. The Power Cord can be wound around the Heel Rest for easier and tidy storing once the unit has cooled
down. The Iron should always be stored in an upright position.
Please visit your Oster website for more tips on ironing.
GCSTBS5001_GCSTBS5002_GCSTBS5003_GCSTBS5004_GCSTBS5051_GCSTBS5052_GCSTBS5053_21EPM2 (LA).indd 5 GCSTBS5001_GCSTBS5002_GCSTBS5003_GCSTBS5004_GCSTBS5051_GCSTBS5052_GCSTBS5053_21EPM2 (LA).indd 5
IRONING TEMPERATURE
SETTING THE TEMPERATURE
ANTI-CALC
MAINTENANCE AND CLEANING
STORING THE IRON
E n g li s h -5
.
Figure 4
6/18/21 09:34 6/18/21 09:34