Onboard Serial Port 1; Onboard Serial Port 2 - Gigabyte GA-7VKMP User Manual

IDE1 Conductor Cable
Auto
ATA66/100/133
ATA33
IDE2 Conductor Cable
Auto
ATA66/100/133
ATA33
On Board FDC
Auto
Disabled
Enabled

Onboard Serial Port 1

Auto
Disabled
3F8/ COM1
2F8/ COM2
3E8/ COM3
2E8/ COM4

Onboard Serial Port 2

Auto
Disabled
3F8/ COM1
2F8/ COM2
3E8/ COM3
2E8/ COM4
GA-7VKMP Series Motherboard
Will be automatically detected by BIOS. (Default Value)
Set IDE1 Conduc tor Cable to ATA66/ 100/133 (Please mak e sure y our IDE
dev ic e and cable is compatible w ith ATA66/100/133)
Set IDE1 Conduc tor Cable to ATA33 (Please m ake sure y our IDE dev ice
and cable is compatible w ith ATA33)
Will be automatically detected by BIOS. (Default Value)
Set IDE1 Conductor Cable to ATA66/100. (Please make sure y our IDE
dev ic e and cable is com patible w ith ATA66/100)
Set IDE1 Conduc tor Cable to ATA33. (Please m ake sure y our IDE dev ice
and cable is compatible w ith ATA33)
Set On Board FDC to Auto. (Default Value)
Disable On Board FDC.
Enable On Board FDC.
BIOS w ill automatically setup the port 1 address. (Default Value)
Disable onboard Serial port 1.
Enable onboard Serial port 1 and address is 3F8.
Enable onboard Serial port 1 and address is 2F8.
Enable onboard Serial port 1 and address is 3E8.
Enable onboard Serial port 1 and address is 2E8.
BIOS w ill automatically setup the port 2 address. (Default Value)
Disable onboard Serial port 2.
Enable onboard Serial port 2 and address is 3F8.
Enable onboard Serial port 2 and address is 2F8.
Enable onboard Serial port 2 and address is 3E8.
Enable onboard Serial port 2 and address is 2E8.
- 44 -