Table of Contents
Advertisement
7) IDE1/ IDE2(IDE1/IDE2 Connector)
Please connect first harddisk to IDE1 and connect CDROM to IDE2. The red stripe of the
ribbon cable must be the same side with the Pin1.
8) IDE3 /IDE4 (RAID/ATA133,Green Connectorr)**
The rad stripe of the ribbn cable must be the same side with the Pin1.
If you wish to use IDE3 and IDE4, please use it in unity with BIOS (either RAID or ATA133).
Then, install the correct driver to have proper operation. For details, please refer to the RAID
manual.
(BIOS Default Value :ATA, If you want to use RAID function, please
change " Integrated Peripherals-RAID Controller Function " to " RAID" )
" ** " FOR GA-7VAXP-A Ultra / GA-7VAXP-A Only.
KT400A Series Motherboard
40
2
40
2
- 24 -
39
1
39
1
Advertisement
Table of Contents
