Onboard Serial Port 2
Disabled
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Auto
UART Mode Select
This item allows you to determine which Infra Red(IR) function of Onboard I/O chip.
Normal
IrDA
ASKIR
UR2 Duplex Mode
This feature allows you to seclect IR mode.
This function will available when "UART Mode Select" doesn't set at "Normal" nor "SCR".
Half
Full
Onboard Parallel port
This feature allows you to select from a given set of parameters if the parallel port uses the onboard
I/O controller.
Disabled
378/IRQ7
278/IRQ5
3BC/IRQ7
N400 Pro2 / N400 Series Motherboard
7n400pro2_1001_b.p65
Disable onboard Serial port 2.
Enable onboard Serial port 2 and address is 3F8, using IRQ4.
Enable onboard Serial port 2 and address is 2F8, using IRQ3. (Default value)
Enable onboard Serial port 2 and address is 3E8, using IRQ4.
Enable onboard Serial port 2 and address is 2E8, using IRQ3.
BIOS will automatically setup the port 2 address.
Set onboard I/O chip UART to Normal Mode. (Default Value)
Set onboard I/O chip UART to IrDA Mode.
Set onboard I/O chip UART to ASKIR Mode.
IR Function Duplex Half. (Default Value)
IR Function Duplex Full.
Disable onboard LPT port.
Enable onboard LPT port and address is 378, using IRQ7. (Default Value)
Enable onboard LPT port and address is 278, using IRQ5.
Enable onboard LPT port and address is 3BC, using IRQ7.
- 52 -
52
2003/7/4, ¤U¤È 03:29