Initial Installation - Digiality T-500 CX User Manual

3. Initial Installation

When connecting the receiver for the first time,
this menu will appear:
A clear signal
Please check that your TV has a signal.
With the P+ and P- buttons you can select
"Check Signal" and then confirm by
pressing OK
This menu will appear:
Now enter the channel number given to
you by your TV station or TV store. Enter
the digits on the remote control. Your
signal quality indicator must turn green.
In case of no green signal you may try to run a "Quick Installation". In that case Digiality T-500 CX will seek
within a defined range of frequencies to find suitable channels.
Digiality T‐500 CX
6 / 28