Page 1
Digiality T-500 CX User Manual Important! Please read this manual before connecting the Digiality receiver. The receiver can be connected to one TV set only. Digiality T‐500 CX ...
15. Program card ..............................21 1 6 . S o f tw a r e U p da t e s ..................................22 17. Reinstall ................................. 22 18. System Information ....................................24 19. FAQ ..............................25 20. Technical Specifications: Digiality T‐500 CX 3 /28...
If you further want to support our environmental care please return the receiver to your dealer if it is malfunctioning. He will then return it to us to ensure that it is repaired using the original parts. Digiality T‐500 CX 4 / 28...
Extras needed: Antenna Active Antenna Digiality T-500 CX can feed your antenna with a +5V power supply. This is the default setup. If this power source is unnecessary, please follow this procedure on your remote control: Menu Settings general settings...
Your signal quality indicator must turn green. In case of no green signal you may try to run a “Quick Installation”. In that case Digiality T-500 CX will seek within a defined range of frequencies to find suitable channels.
SCART or HDMI Optional speakers - Analouge or digital Optional Video Recorder Digiality T-500 CX To connect the receiver to your TV set use a HDMI cable or a scart cable. Connect the receiver to an antenna. Digiality T-500 CX Insert the program card with the chip facing downwards.
Choose TV format as zoom or 4:3. Make your choice by pressing the OK button. Continue the installation by using the P-. Digiality T-500 CX will search and find all suitable channels. You may be asked to choose between networks using the buttons P+ and P-.
To deactivate/activate the sound use the vertical button: Choices Confirm all choices by pressing OK . Exit! You can always return to the TV program by pressing the exit button or go one step back by using the back button. Digiality T‐500 CX 9 / 28 ...
Easy way to find the latest page. If you leave the Text-TV and later return to the same channel, you will still be on the Text-TV page you last visited. between pages you have been reading. Press the << and >> buttons. To move back and forth Digiality T‐500 CX 10 / 28...
Move sideways using the << or >> buttons. Rename your list using the TXT button. Delete a channel in the favourite channel list using the red button ’Red’ Change the order of the channels in your favourite list by using the yellow button: Move ’Yellow’ Digiality T‐500 CX 11 / 28 ...
9. Information Shortcuts Quick Info Digiality T-500 CX provides you with an overview of the programs you can choose from. You get three very fast shortcuts to all-round information about TV programs: Quick Info press i The i button opens information about the current program and what is coming next.
Press the yellow button to choose next program. ’Red’ It is possible to set a timer using the red button. The timer will activate Digiality T-500 CX at the preset time. Remember to set a timer on your video recorder too. Read info about video on p. 16.
If you move through the guide too many days ahead, however, the information may not appear. This may occur because it has not yet been released by the TV station. If necessary you can scroll in the right window using the yellow button: ’Yellow’ You can set a timer function using the red button. ’Red’ Digiality T‐500 CX 14 / 28...
Every time you want to set another timer you move down the list activating P-. Every time you confirm at the OK Every time you confirm at the OK another window will open… Always remember to activate the Video Recorder as well! Digiality T‐500 CX 15 / 28 ...
OK button. When a timer is active the receiver is locked and LOC appears in the display. Pressing EXIT will cancel the timer and the receiver will go back to normal operation. Remember to set the Video Recorder!! Digiality T‐500 CX 16 / 28...
The SCART release signals to the TV set that this SCART input should no longer be the prioritized input. Typical use is that you want to watch some other input of the TV (HDMI, RF or second SCART). Move down with the P- and confirm at the OK . Digiality T‐500 CX 17 / 28 ...
<< and >> buttons. Info banner settings When switching to another program, a small banner with program info will shortly appear. You can choose between time settings of either 3, 6 or 10 seconds: Menu settings general settings banner Digiality T‐500 CX 18 / 28...
A locked channel can only be opened with a PIN code Code Digiality T-500 CX has a preset PIN Code which is 0000. You can choose your own code by entering other digits. You will be asked to confirm your code by entering the digits once again: Menu...
15. Program card Check the status of your program card Menu Settings Conditional Access Conditional Access is an overview of the program card: Subscription status Tokens Status Event status Messaging Change CA PIN Maturity Rating About Conax CA Digiality T‐500 CX 20 / 28...
Updates One of our objectives in the development of Digiality T-500 CX has been to create a menu system that is easy to use. It is a high quality software, and in case we need to update, the updates can be run automatically.
A warning will appear informing that all your favourite settings will be erased. In case you still want to proceed, press the >> button and confirm using the OK button. 18. System Information You can find technical specifications here: Menu settings system information Digiality T‐500 CX 22 / 28...
Page 23
<< / >> Next or previous in the menu. V+ / V Volume up / down MUTE Mute Play pause & Stop No function I Information 0-9 Number keys Shortcut buttons (Red, Yellow, Green and Blue) Used for menu navigation Digiality T‐500 CX 23 / 28 ...
Be sure you point the remote control directly at the front panel. It does not work in Antenna signal is too low. Try to connect directly to antenna. an adjacent room: Digiality T‐500 CX 24 / 28...