Table of Contents
Advertisement
19. FAQ
No signal:
Picture/sound is missing
Picture freeze:
Encrypted channel
Remote Control failure
It does not work in
an adjacent room:
Check the antenna and the cable.
Problems with connection – check the SCART/HDMI plug.
Check the antenna
Enter PIN code
Check the batteries
Make sure that the TV is connected, and check that there is no obstruction
between the remote control and the receiver.
Be sure you point the remote control directly at the front panel.
Antenna signal is too low. Try to connect directly to antenna.
Digiality T‐500 CX
24 / 28
Advertisement
Table of Contents
