[Step Zoom] - Panasonic Lumix DMC-TZ71 Operating Instructions Manual

Application (Record)

[Step Zoom]

You can set the zoom operation to allow easy visualisation of the angle of view (picture
angle) for the focal length of a regular fixed focal length lens (as with a 35 mm film
camera). When using the Step Zoom, you can operate the zoom ratio as easily as
changing the camera lens.
• If recording in [Intelligent Auto] Mode, you can adjust the [Step Zoom] with the control
ring/control dial.
If the setting assigned to the control ring/control dial is [Step Zoom], [Step Zoom] will
also be available for use in other modes.
Turn the control ring or control dial
(In [Program AE] Mode, the control ring is assigned to [Step Zoom]. Example of
DMC-TZ70 screen)
The illustration is an example of when using Extra optical zoom, [i.Zoom], and
[Digital Zoom]. The zoom ratio is not displayed.
■
Using the zoom lever for [Step Zoom]
You can use the zoom lever for [Step Zoom] by setting [Zoom Lever Set] to [Step Zoom]
in the [Setup] menu.
Current zoom position
(Focal lengths the same as those of a 35 mm film camera)
(→65)
Current zoom position
(Focal lengths the same as those of a 35 mm film camera)
- 84 -
(→135)
(→81)
Using Zoom
SQW0206