Panasonic Lumix DMC-TZ71 Operating Instructions Manual page 297

Others
TV, computer, printer (continued)
Computer does not recognise card (only reads built-in memory).
●
Disconnect USB connection cable (supplied) and reconnect with card in place.
●
If there are two or more USB terminal on a single PC, try connecting the USB connection cable to
another USB terminal.
Computer does not recognise card. (When using an SDXC Memory Card)
→ Check whether your computer is compatible with SDXC Memory Cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
→ A message prompting you to format the card may appear when you connect it. Do not format the
card.
→ If the [Access] indicator on the screen does not go off, turn the camera off before disconnecting
the USB connection cable.
Cannot print when connecting to printer.
●
Printer not compatible with PictBridge.
●
Set [USB Mode] to [PictBridge(PTP)] (→73).
The edges of pictures are cut off when printing.
●
Release any trimming or edgeless printing settings on printer before printing.
(Refer to the instruction manual for the printer.)
●
The pictures were recorded in [
→ If printing in shop, check if 16:9 sizes can be printed.
Cannot print panorama pictures properly.
●
The aspect ratio of panorama pictures is different from that of regular still pictures, and some
panorama pictures may not be printed correctly.
→ Use a printer with support for panorama pictures. (Refer to the instruction manual for the printer.)
→ We recommend adjusting the size of a picture in accordance with print paper using the
"PHOTOfunSTUDIO" software on the CD-ROM (supplied).
] aspect ratio.
- 297 -
Q&A Troubleshooting
SQW0206