Download Print this page
La Crosse Technology WT-3161BL Instruction Manual

La Crosse Technology WT-3161BL Instruction Manual

Atomic wall clock

Advertisement

Quick Links

1: Slide the switch to select a time zone.
2: Insert 1 fresh AA, Alkaline battery according to the polarity
marked on the case.
3: For the best reception, please place clock on a wall that faces
Ft. Collins, Colorado. During the night, your clock will
automatically set itself.
When the battery is installed, the hands will move to the 12:00
position and search for the radio signal.
If the radio signal is not received in the first 10 minutes, the
clock will start running from the 12:00 position and will
continue to run.
The clock is searching for the WWVB signal and once the
radio signal is decoded, the hands will automatically adjust to
the correct time. This may take up to 5 nights if there is
atmospheric interference.
Reset: If the clock does not respond to the various function
modes, press the RESET button on the movement case.
WT-3161WH
16" Atomic Wall Clock
Get Started
www.lacrossetechnology.com/support
Model: WT-3161WH
Instruction Manual
DC: 041916
Page | 1

Advertisement

loading

Summary of Contents for La Crosse Technology WT-3161BL

  • Page 1 Model: WT-3161WH Instruction Manual DC: 041916 16” Atomic Wall Clock Get Started 1: Slide the switch to select a time zone. 2: Insert 1 fresh AA, Alkaline battery according to the polarity marked on the case. 3: For the best reception, please place clock on a wall that faces Ft.
  • Page 2 Position Clock • For the best reception, please place clock on a wall that faces Ft. Collins, Colorado. The antenna is best positioned for signal reception when there is only one wall or window between the clock and outside. • Choose a location 6 feet or more from electronics such as cordless phones, wireless gaming systems, televisions, microwaves, routers, baby monitors, etc., which can prevent...
  • Page 3 Troubleshooting The wonderful advantage of owning a radio-controlled clock is that it is virtually trouble free. If the clock receives a clear time signal, it will set itself perfectly. If it does not receive a time signal, consider the following: •...
  • Page 4 Q. How long will the battery last? A. A good AA alkaline battery will last over 24 months. Q: Can I wire a control timing circuit to the La Crosse Technology® atomic clock? A: The clock cannot work on a timing circuit. Opening the clock voids the warranty.

This manual is also suitable for:

Wt-3161wh