La Crosse Technology WT-3161BK Quick Start Manual

16” atomic wall clock

16" Atomic Wall Clock

Model: WT-3161BK

DC: 011817

For information about WWVB, atomic time signal visit:

http://bit.ly/AtomicTime

Power up

Select Time Zone and DST ON or OFF.

Insert 1 AA battery into the movement.

For best reception, place clock on a wall that

faces Ft. Collins, Colorado.

During the night, your clock will set itself.

IMPORTANT:

• Hands will move to 12:00 and search for the

atomic time signal.

• If no signal, after 8-10 minutes, clock will run

from 12:00 am.

• Clock will continue to search for the WWVB

atomic time signal.

• Allow up to 5 nights for the clock to receive

the atomic time signal.

Table of Contents

Do you have a question about the WT-3161BK and is the answer not in the manual?

Page 1 • Clock will continue to search for the WWVB atomic time signal. • Allow up to 5 nights for the clock to receive the atomic time signal. Model: WT-3161BK DC: 011817 For information about WWVB, atomic time signal visit: http://bit.ly/AtomicTime...
Page 2 4. The atomic time signal will override manual settings. Warranty Support Reset: La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & If the clock does not respond to function modes, press the workmanship.