LG OLED65B7V Manual
Hide thumbs Also See for OLED65B7V:

Advertisement

Quick Links

Safety and Reference
Please read this manual carefully before operating your set and
retain it for future reference.
www.lg.com
*MFL69727207*
P/NO : MFL69727207 (1701-REV00)
Printed in Korea

Advertisement

Table of Contents
loading

Summary of Contents for LG OLED65B7V

  • Page 1 Safety and Reference Please read this manual carefully before operating your set and retain it for future reference. www.lg.com *MFL69727207* P/NO : MFL69727207 (1701-REV00) Printed in Korea...
  • Page 2 Warning! Safety instructions • Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off. You may be electrocuted due to excess moisture. •...
  • Page 3 • Only use an authorized AC adapter and power cord approved by product may fall over, which may cause injury or damage the product. LG Electronics. Otherwise, this may result in fire, electric shock, • Do not turn the product On/Off by plugging-in or unplugging the malfunction or product deformation.
  • Page 4 • Please follow the installation instructions below to prevent the • When cleaning the product and its components, unplug the power product from overheating. first and wipe it with a soft cloth. Applying excessive force may cause - The distance between the product and the wall should be more scratches or discolouration.
  • Page 5: Lifting And Moving The Tv

    Lifting and moving the TV • Use a certified cable with the HDMI logo attached. • If you do not use a certified HDMI cable, the screen may not display or a connection error may occur. (Recommended HDMI Cable Types) Please note the following advice to prevent the TV from being scratched - High-Speed HDMI Cable (3 m or less)
  • Page 6: Using The Button

    Basic functions • Do not apply excessive pressure to cause flexing/bending of frame chassis as it may damage screen. • When handling the TV, be careful not to damage the protruding Power On (Press) buttons. Power Off (Press and hold) •...
  • Page 7: Mounting On A Wall

    LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with cables connected. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices.
  • Page 8: Connections (Notifications)

    • To remove the stand, hold the top and bottom of stand, then pull it • In PC mode, there may be noise associated with the resolution, out while also lowering it as shown below. (Only OLED55E7*) vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.
  • Page 9: Magic Remote Functions

    USB connection (Depending on model) Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it directly to the USB port on the TV. Other connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable.
  • Page 10 wxyz Control buttons ( ) Controls media contents. By zooming in on the selected area, you can view it in full screen. MENU * You can zoom in on the area where the remote control is pointed. These access special functions in some menus. * To use the button, press and hold for more than 3 seconds.
  • Page 11 Returns to the previous level. * Clears on-screen displays and returns to last input viewing. Shows programmes guide. Streaming Service buttons Connects to the Video Streaming Service. (INPUT) Changes the input source. - Pressing and holding the button displays all the lists of external inputs.
  • Page 12: Troubleshooting

    Mode settings. (Depending on model) LG Electronics will also provide open source code to you on CD-ROM • If there is no signal while the TV is on, the TV will turn off for a charge covering the cost of performing such distribution (such automatically after 15 minutes of inactivity.
  • Page 13: Specifications

    Specifications Abnormal Display • If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with Wireless module specifications product. • As band channels can vary per country, the user cannot change or •...
  • Page 14 (Depending on country) Digital TV Analogue TV DVB-T DVB-T2 PAL/SECAM, B/G, D/K, I Television system DVB-C SECAM L DVB-S/S2 DVB-S/S2 DVB-C DVB-T/T2 VHF III : 174 ~ 230 MHz Channel coverage UHF IV : 470 ~ 606 MHz 46 ~ 862 MHz (Band) 950 ~ 2150 MHz 46 ~ 890 MHz...
  • Page 16 Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL...

Table of Contents