Panel And Jumper Definition; J2 (2X11 Pins Jumper) - Gigabyte 6VTXDR-C User Manual

Panel And Jumper Definition

J2 : 2x11 Pins Jumper
GN (Green Switch)
GD (Green LED)
HD (IDE Hard Disk Active LED)
SPK (Speaker Connector)
RE (Reset Switch)
P+P P (Power LED)
PW (Soft Power Connector)
Please note, Please connect the power LED, PC speaker, reset switch and power switch etc
of your chassis front panel to the front panel jumper according to the pin assignment above.
Panel and Jumper Definition
S P K
GN
1
1
HD P P P+
Open: Normal Operation
Close: Entering Green Mode
Pin 1: LED anode(+)
Pin 2: LED cathode( )
Pin 1: LED anode(+)
Pin 2: LED cathode( )
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data( )
Open: Normal Operation
Close: Reset Hardware System
Pin 1: LED anode(+)
Pin 2: LED cathode( )
Pin 3: LED cathode( )
Open: Normal Operation
Close: Power On/Off
22
RE GD
1
PW