Memory Installation - Gigabyte 6VTXDR-C User Manual

6VTXDR Motherboard

Memory Installation

The motherboard has 4 dual inline memory module (DIMM) sockets support 4 banks. The BIOS
will automatically detects memory type and size. To install the memory module, just push it
vertically into the DIMM Slot .The DIMM module can only fit in one direction due to the two notch.
Memory size can vary between sockets.
1. The DIMM slot has two notch, so the DIMM
memory module can only fit in one direction.
3. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
Reverse the installation steps when you wish to remove the DIMM module.
Install memory in any combination table:
DIMM 168-pin SDRAM DIMM Modules
DIMM 1 Supports 16 / 32 / 64 / 128 / 256 / 512 MB / 1GHz
DIMM 2 Supports 16 / 32 / 64 / 128 / 256 / 512 MB / 1GHz
DIMM 3 Supports 16 / 32 / 64 / 128 / 256 / 512 MB / 1GHz
DIMM 4 Supports 16 / 32 / 64 / 128 / 256 / 512 MB / 1GHz
★Total System Memory (Max 4GB)
SDRAM
2. Insert the DIMM memory module vertically
into the DIMM slot. Then push it down.
11
X 1 pcs
X 1 pcs
X 1 pcs
X 1 pcs