Detaching The Stand Base; Using The Cable Holder; Detaching The Stand Body - LG 24CAV37K-B.AEU Owner's Manual

8
ASSEMBLING AND PREPARING

Detaching the stand base

1
Place the monitor's screen face down.
To protect the screen from scratches, cover the
surface with a soft cloth.
2
Using a coin, turn the screw in the stand base
counterclockwise. Detach the stand base from
the stand body.
Stand Base
CAUTION
The components appearing in the illustra-
y
tions may look different from the actual prod-
uct.
Do not carry the monitor upside-down as this
y
may cause it to fall off its stand, resulting in
damage or injury.
To avoid damaging the screen when lifting
y
or moving the monitor, only hold the stand or
the plastic cover. This avoids putting unnec-
essary pressure on the screen.
Only remove the tape and the locking pin
y
when the monitor is mounted on the stand
base and is in an upright position. Otherwise,
the stand body may protrude, which may
lead to injury.

Using the cable holder

Fix the Knob (Cable holder) to the
1
Hole(Hingebody).
Use one screw to fix the Cable Holder and
2
monitor set.
Close the Cable holder.
3
Stand Body
NOTE
NOTE
The holes are used for wall mount bracket.
The holes are used for wall mount bracket.
y
Varies depending upon your country or
Varies depending upon your country or
y
model.
model.

Detaching the stand body

1
Place the monitor's screen face down. To
protect the screen from scratches, cover the
surface with a soft cloth.
2
Using a screwdriver, remove the four screws
and detach the stand from the monitor.