La Crosse Technology 513-149V2 Faqs page 11

Digital Atomic Clock Has Distorted Display
 On a brand new Digital Atomic Clock check for thin plastic films of printed scratch guard that
may be on the upper and lower screen of the Digital Atomic Clock. This thin piece of plastic
has printed numbers for store displays.
 This film will be easy to peel off the LCD.
 With all power removed the Digital Atomic Clock should be blank.
 If numbers still appear, please check for scratch guard.
 Check that the batteries are installed correctly.
 This is generally a power related issue.

Batteries may be overpowered or underpowered. Remove batteries from the Digital Atomic
Clock.
 Press any button 20 times. Leave the batteries out of the display for 2 hours.
 Insert fresh alkaline batteries into the Digital Atomic Clock.
Digital Atomic Clock Display Is Frozen
 On a brand new Digital Atomic Clock check for thin plastic films of printed scratch guard that
may be on the upper and lower screen of the Digital Atomic Clock. This thin piece of plastic
has printed numbers for store displays. This can make the Digital Atomic Clock display
appear "frozen".
 With all power removed the Digital Atomic Clock should be blank.
 If numbers still appear, please check for scratch guard.
 Check that the batteries are installed correctly.
 This is generally a power related issue.

Batteries may be overpowered or underpowered. Remove batteries from Digital Atomic
Clock.
 Press any button 20 times. Leave the batteries out of the display for 2 hours.
 Insert fresh alkaline batteries into the Digital Atomic Clock.
Digital Atomic Clock is Blank: No Letters, Numbers or Dashed Lines
 Check that the batteries are installed correctly.

Batteries may be overpowered or underpowered. Remove batteries from Digital Atomic
Clock.
 Press any button 20 times. Leave the batteries out of the display for 2 hours.
 Insert fresh alkaline batteries into the Digital Atomic Clock.
Digital Atomic Clock Drains Batteries Quickly
 Test a new set of alkaline batteries. Write down the date of installation and the voltage of the
batteries.
 When the batteries fail, please note the date and voltage again. This is helpful in
determining the problem.
 Check for leaking batteries, which may damage the Digital Atomic Clock.
 Battery life is over 12 months when using reputable battery brands.
La Crosse Technology, Ltd. Page 11