Sharp XG-P560WA Operation Manual page 17

Part Names and Functions
Numbers in refer to the main pages in this operation manual where the topic is explained.
Projector (Rear View)
Terminals Refer to "Connecting the Projector to Other Equipment" on pages 24–26.
HDMI terminal
Terminal for HDMI input.
DVI-D input terminals
Terminals for DVI digital
RGB and digital component
signals and audio input
terminal.
COMPUTER/COMPONENT1
input terminals
Terminals for computer RGB
and component signals and
audio input terminal.
MONITOR OUT terminals
∫
COMPUTER/COMPONENT
output terminal for computer
RGB and component signals.
(Shared for COMPUTER/
COMPONENT 1 and 2 input)
∫
AUDIO output terminal.
(Shared for all inputs)
VIDEO input terminals
Terminals for connecting
video equipment and audio
input terminal.
Kensington Security
Standard connector
Using the Kensington Lock
• This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security
System. Refer to the information that came with the system for instructions on how to use it to secure the
projector.
-14
24
25
24
25
24
25
26
26
24
COMPUTER/COMPONENT 2
terminals
25
BNC terminals for computer
RGB and component signals
and audio input terminal.
27
LAN terminal
Terminal for controlling the
projector using a computer
via network.
27
RS-232C terminal
Terminal for controlling the
projector using a computer.
WIRED REMOTE terminal
17
For connecting the remote control
to the projector when the signals
from the remote control cannot
reach the remote control sensor.
26
S-VIDEO input terminals
Terminals for connecting video
equipment with an S-video
terminal and audio input terminal.
28
AC socket
Connect the supplied power cord.
67
Filter cover
(Intake vent)
68
Carrying handle
For carrying the projector.
16
Remote control sensor