Operating Instructions; Loading The Industrial Stapler - Signode Josef Kihlberg F560PN Operating Instructions Manual

6
Fig. 4
Fig. 5
Fig. 6
05.20
OPERATING INSTUCTIONS

6.1 LOADING THE INDUSTRIAL STAPLER

– Always use Josef Kihlberg original staples
JK560-15, JK560-18 or JK560-22.
The correct type of staple is marked on the left side
of the magazine.
– Pull the pusher back and lift up the pusher into its
rear holder.
– Insert staple strips from the rear.
– Do not overload the magazine.
– Release the pusher.
Josef Kihlberg F560PN
Do not release the pusher directly from
the rear when the magazine is empty,
carefully guide it forward.
7