2.8
Installing GPU cards
•
•
•
•
•
To install a GPU card to the system:
1.
Remove the screws on the metal covers on the rear panel and the corresponding metal
shutter at the middle of the server system (A), then remove the metal covers and the
metal shutter from the chassis (B).
2-32
Use both of your hands in performing the following steps.
Read the documentation that comes with your GPU card before installing them.
When installing more than one GPU card, it is recommended to install the card on
PCIE1 slot first.
When the PCI-E topology is set to Single Root, the video output order will be
PCIE5 > PCIE8 > PCIE6 > PCIE7 > PCIE1 > PCIE4 > PCIE2 > PCIE3.
When the PCI-E topology is set to Dual Root, the video output order will be
PCIE1 > PCIE4 > PCIE2 > PCIE3 > PCIE5 > PCIE8 > PCIE6 > PCIE7.
Metal shutter
Metal covers
Chapter 2: Hardware Setup