Loading With A Fork Lift; Unloading With A Fork Lift; Moving The P3 All Around; Figure 5 Loading With A Fork Lift - U-Line Presto Lifts P3 All Around Installation, Operation And Service Manual

Loading with a Fork Lift

1. Place the evenly layered load on the unit. Be sure
the load is centered on the turntable, then slowly lower
the fork lift.
• Lower the load until the airbag on the P3 All Around is
fully compressed.
• Be sure the forks on the lift are clear of the inside of
the pallet and ensure unit is carrying the weight - not the
fork lift, see figure 5.
If you skip these steps, the load may drop suddenly when you remove the fork lift. You
may be hurt or the unit or load may be damaged.
Never drop the load on the turntable. If you do this while the turntable is moving, the load
may shift. You may be injured or the unit may be damaged.
If the load is off-center, it may shift when the turntable is turned. You may be hurt or the
unit or load may be damaged.

Unloading with a Fork Lift

1. Insert the forks into the evenly loaded pallet, and
slowly lift the pallet clear of the top of the unit. See
Figure 6.
• Be sure the pallet clears the top of the turntable
before you move the fork lift.
If you skip these steps, the unit may jump up suddenly when you remove the pallet. You
may be hurt or the unit or load may be damaged.

Moving the P3 All Around

It can be moved loaded or empty. When moving
a loaded P3 All Around be sure to secure the load
(stretch film or strapping) to avoid spillage.
There are three ways to move it.
1. Use a forklift inserting the forks into the pockets in
the base frame, as shown in Figure 7.
PAGE 13 OF 18
Figure 5. Loading with a Fork Lift
WARNING!
WARNING!
WARNING!
Figure 6. Unloading with a Fork Lift
WARNING!
Figure 7. Moving the P3 All Around
P3 ALL AROUND - PRESTO PALLET POSITIONER
H-1820
13
0721 IH-1820VND