Table of Contents
Advertisement
left page (114)
of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (13.10.2004, 15:04)
114
Setup
Data services
Basic setting and activation of the
connection profiles for data trans-
mission such as
The phone default setting varies
from service provider to service pro-
vider.
• The settings have already been
implemented by the provider. You
can start immediately.
• Access profiles have already been
created by your provider. Then
select and activate profile.
• The access profiles must be
configured manually. In this case,
you will receive the necessary
data from the service provider or
via the "Setting Configurator" at
(p. 149): www.siemens-mobile.com/
mobilescustomercare
Select profile
Select the profile.
I
Confirm selection.
C
Set profile
Select the profile.
I
§Options§
Open menu.
§Edit§
Open the selection.
MMS,
WAP.
Select
CSD
GPRS
settings.
I
§Edit§
Select service and enter
data (see below).
§Save§
Save settings.
CSD (Circuit Switched Data)
Dial-up
Enter ISP number.
number:
Call type:
Select ISDN or
analogue.
Login:
Enter login name.
Password:
Enter password (shown
as a series of asterisks).
DNS1 / DNS 2:
(optional).
GPRS (General Packet Radio Service)
You can only start to use GPRS once
you have activated GPRS on your
phone(p. 113).
APN:
Enter service provider
address.
Login:
Enter login name.
Password:
Enter password (shown
as a series of asterisks).
DNS 1 (opt.):
(optional).
DNS 2 (opt.):
settings, and/or
Advertisement
Table of Contents
