Siemens Emoty Manual page 109

Table of Contents

Advertisement

left page (109)
of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (13.10.2004, 15:04)
All calls
All calls are diverted.
Icon in the top line of the
display in standby mode.
Ç
Not reachable
Divert occurs if phone is switched off
or is out of range.
No reply
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
Busy
Divert occurs if a call is in progress.
If
Call waiting
will hear the call waiting tone during
a call.
Receiving fax
Fax calls are diverted to a number
with a fax connection.
Receiving data
Data calls are diverted to a phone
number with a PC connection.
is activated (p. 48), you
b
Additional information
Note that the divert is stored in the network
and not in the phone (e.g., when the SIM
card is changed).
Reactivate divert
The last divert has been stored. Proceed
as with "Set divert". The stored phone
number is displayed. Confirm number.
Call screening
Only calls from phone numbers that
are in the Phonebook/Addressbook
or in a group are signalled. Other
calls are only displayed.
Any key
Incoming calls can be accepted by
pressing any key (except for
b
Minute beep
During the call, you will hear a beep
after each minute as a reminder of
b
the time elapsed. The recipient does
not hear this beep.
Setup
109
b
).
B

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cx70

Table of Contents