Table of Contents
Advertisement
Dolby Digital Plus Out: Select [Auto] to
pass through Dolby Digital Plus
stream to ARC when Dolby Digital
Plus is available through connected
Audio System.
During Dolby Digital Plus stream is
output, Digital Audio Out (optical)* is
muted.
Select [Off] to convert Dolby Digital
Plus stream to Dolby Digital for both
ARC (Audio system) and Digital Audio
Out (optical)*.
HE-AAC Audio Level: Adjust the HE-
AAC audio sound level.
MPEG Audio Level: Adjusts the MPEG
audio sound level.
* Only on limited region/country/TV model.
Screen
Wide Mode
For details about wide mode, see page 13.
Auto Wide
Automatically changes the wide mode
according to the input signal from an
external equipment.
4:3 Default
Sets the default [Wide Mode] for a 4:3
input signal.
Auto Display Area
Select [On] to automatically adjusts the
display area based upon the content or
[Off] to choose from the [Display Area]
options.
Display Area
Adjusts the picture display area.
H Center
Adjusts the horizontal position of the
picture.
V Center
Adjusts the vertical position of the picture.
Vertical Size
Adjusts the vertical size of the picture
when [Wide Mode] is set to [Wide Zoom].
20
GB
PC Settings
Adjust the picture size, see page 13.
Channel Setup
Cable/Antenna
Cable: Select if you are receiving cable
channels via Cable TV provider.
Antenna: Select if you are using an
antenna.
Auto Program
Automatically sets up the channel list on
the TV for all receivable channels.
Select [Auto Program] then press
Add Digital Channels
Select [Add Digital Channels].
Select [OK] to add digital channels.
Show/Hide Channels
Allows you to show or hide channels that
appear when you use the CH/PROG +/–
buttons.
Press / to scroll through the channels
until you find the channel you want to
show or hide. Then press
Press / to determine if the channel will
be shown or hidden. Then press
select it.
Edit Analog Channel Labels
Allows you to assign labels (such as
station call letters) to channel numbers.
Press F/f to scroll through the channel
numbers. Then press
channel number that you want to assign a
label.
Press F/f to scroll through the label
characters ([A-Z], [0-9], etc.). Press g to
move to the next character. Repeat the
previous steps to add up to seven
characters to the label. When finished,
press
.
.
to select it.
to
to select the
Advertisement
Table of Contents
