Video Setup - Optoma ML1050ST+ User Manual

Hide thumbs Also See for ML1050ST+:
Table of Contents

Advertisement

Video Setup

Access the video settings menu. The video setting menu provides the following option:
Display Ratio
 
Select the display ratio of the Video.
Letter box: If the video source does not fit a 16:10 screen then the video image
y
is stretched equally in the horizontal and vertical directions to fit the screen.
Therefore parts of the video are cropped at the top and bottom (left and right)
sides and appear as "black bars" around the video.
Cut screen: Choose to display the video in its native resolution without scaling.
y
If the projected image exceeds the screen size then it will be cropped.
Full screen: Regardless the native aspect ratio, the video image is stretched
y
non-linearly in the horizontal and vertical directions to exactly fit the 16:10 screen.
You will not see the "black bars" around the video image but the proportions of
the original content may be distorted.
Original screen: Choose to display the video image in its native resolution
y
without scaling. If the video resolution is lower than 1280x800 then you will see
"black bars" around the edges of the video image. If the resolution is higher than
1280x800 then the video is displayed in 1280x800 resolution.
Repeat Mode
 
Select the video repeat mode. Options are: Sequence, Single, Random, Once.
42 English
Video
Display Ratio
Letter box
Repeat Mode
Sequence

Advertisement

Table of Contents
loading

Table of Contents