Settings Details - Panasonic 96NKX-UT248 Operating Instructions Manual

Customizing the Telephone

Settings Details

Ringer
Setting
Ringer Volume
Ringtone (current setting
confirmation)
Note
•
The preset melodies in this product are used with permission of © 2009 Copyrights Vision Inc.
•
Ringtone 20 to Ringtone 24 are the same as Ringtone 1.
•
Ring tones can also be assigned to individual entries in the phonebook list (Page 35).
ECO Mode
Setting
ECO Mode
Note
•
When ECO mode is enabled, the Speed/Duplex setting (Page 45) changes as follows:
–
Speed/Duplex: "10M-Full"
–
PC port cannot be used.
•
When the Eco mode setting is changed, the unit will restart.
•
When Eco mode is enabled,
LCD Contrast
Setting
LCD Contrast
40 Operating Instructions
Description
Adjust the ringer volume.
For KX-UT133/KX-UT136, you can
listen to the ring tones. Ring tones
can be assigned to DN buttons
(flexible buttons, Page 34) through
Web user interface programming
(Page 56), but they cannot be
assigned directly from the unit. For
details about which ring tones are
assigned or if you want to change an
assigned ring tone, consult your
administrator or dealer.
For KX-UT113/KX-UT123, select a
ring tone to use for incoming calls.
If multiple lines are available at your
unit, you must first select which line
to use the ring tone for.
Description
Enabling this mode reduces the
amount of electricity consumed by
the unit.
ECO is displayed while the unit is in stand-by mode.
Description
Change the contrast of the display.
Value Range
Level 0 to 6
Ringtone 1– Ringtone 1
Ringtone 32
Value Range
On, Off
Value Range
Level 1 to 6
Document Version 2011-10
Default
Level 3
Default
Off
Default
Level 3