Connecting The Printer; Connection To A Network - Gestetner DSc38 Setup Manual

Connecting the Printer

Connection to a Network

A
Turn off the power switch.
B
Loop the network interface cable
and attach the ferrite core.
Note
❒ The network interface cable
loop should be about 15 cm (6")
(A) from the end of the cable
(on the end closest to the print-
er).
C
Connect the network interface ca-
ble to the port on the right side of
the printer.
D
Connect the other end of the net-
work interface cable to network
equipment, such as a hub.
Reference
For details about settings for the
network environment, see Ad-
ministrator Reference 1.
Reading the LED lamps
1 .
Y e l l o w : L i g h t s u p w h e n
100BASE-TX is being used. Turns
off when 10BASE-T is being used.
2.
Green: Lights up when the printer
is connected properly to the net-
work.
ZDJP103J
Connecting the Printer
1
2
ZDJH032J
69
2