Table of Contents
Advertisement
Preparing for Printing
❒ If Auto Run starts, click [Cancel], and then [Exit].
F
Select the [Include this location in the search] check box under [Search for the
best driver in these location], and then click [Browse] to select the printer driv-
er location.
If the CD-ROM drive is D, the source files of the printer driver are stored in the
following location:
• RPCS
D:DRIVESRPCSWIN2K_XP(Language)DISK1
• PCL 5c
D:DRIVESPCL5cWIN2K_XP(Language)DISK1
• PostScript 3
D:DRIVESPS3WIN2K_XP(Language)DISK1
G
Check the printer driver location, and then click [Next].
H
Click [Continue].
I
Click [Finish].
If installation is successful, the icon of the printer connected to the "USB001"
port is added to the [Printers] window.
❒ The number after "USB" varies depending on the number of printers con-
nected.
Troubleshooting USB
Problem
The printer is not recognized auto-
matically.
Windows has already configured
the USB settings.
Solutions
Turn off the power of the printer, reconnect the USB cable,
and then turn it on again.
Open Windows' Device Manager, and then, under [Univer-
sal Serial Bus controllers], remove any conflicting devices.
Conflicting devices have a yellow [!] or [?] icon by them.
Take care not to accidentally remove required devices.
For details, see Windows Help.
❒ When using Windows 2000/XP or Windows Server
2003, an erroneous device is displayed under [USB
Controller]in the [Device Manager] dialog box.
63
Advertisement
Table of Contents
