When The Message "Remove Misfeed From Rear Cover" Appears - Gestetner C7006dw Printer Reference

Troubleshooting
F
Open the back guide in the du-
plex tray as shown in the illustra-
tion, and then the remove the
misfed paper.
4
G
Open the guide under the back
guide as shown in the illustration,
and then the remove the misfed
paper.
Important
When removing misfed paper,
handle the guides with great
care.
H
Close the guides opened in steps
F and G.
I
Slide the duplex tray completely
into the printer.
Important
Be sure to insert the duplex tray
completely. If not fully inserted,
misfeeds might occur, or the
front cover might touch the pa-
per tray.
64
When the Message "Remove
Misfeed From Rear Cover"
Appears
R CAUTION:
• When removing misfed paper,
do not touch the fusing section
because it could be very hot.
A
Open the rear cover, and then re-
move the misfed paper.
ZBGY040E
B
Close the rear cover.
Push the center of rear cover until
it rocks.
ZBGY041E
ZBGY090E