Table of Contents
Advertisement
options while on a call
volume control
While on a call, press
/voLUmE to decrease the listening volume.
CID
note: The handset earpiece volume setting (1-5) and speakerphone
volume setting (1-6) are independent. Changing one does not affect
the other.
Join a call in progress
You can use two system handsets at the same time on an outside
call. If a handset is already on a call and you would like to join
the call, press
system handset.
To exit the call, press
telephone base or charger. The call does not end until all handsets hang up.
Chain dialing
While on a call, you can initiate a dialing sequence from numbers stored in the directory,
caller ID history or redial list. Doing this can be useful if you wish to access other
numbers (such as bank account numbers or access codes).
To dial a number from the directory, caller ID history or redial list while on a call, access
the number through the menu system:
While on a call, to show the directory or caller ID history, press mEnU/
1.
>DIrECTorY or >CaLL Log. Press
-or-
While on a call, press rEDIaL/
2.
Scroll to the desired number or press the dial pad keys to find the desired directory
entry (see To search by name in the online user's manual for more options).
/SELECT. The selected number is dialed.
3.
Press
mEnU
redial
Each handset stores the 20 most recently called numbers in the redial list.
To review and call numbers in the redial list, press rEDIaL/
1.
most recently called number appears on the screen.
2.
If it is not the desired number, press DIr or CID to scroll through the numbers in
the list.
3.
Once the desired number appears, press
number. Press
/voLUmE to increase or press
DIr
PHonE/
or
fLaSH
off/
CLEar
PaUSE
off/
to exit the redial list.
CLEar
SPEaKEr on another
or place the handset in the
/SELECT.
mEnU
to show the redial list.
PHonE/
SELECT
in idle mode. The
PaUSE
SPEaKEr to dial the
or
fLaSH
, scroll to
Advertisement
Table of Contents
