Table of Contents
Advertisement
Note2: When the LT-1S is used for a period of time, the inside of the air
bearing sleeve will be dirty, which will affect the normal operation. To
clean the sleeve, loosen the M6 screw and remove the guide rail. Clean
the inside of the sleeve with a wet tissue. After that, re-install the guide
rails.
2. Mount the counterweight and the cartridge. Use the stylus guage adjust the
cartridge tracking force. Put the protractor on the spindle of turntable. Let the
straight line and the edge of the cartridge is parallel. Move the headshell until
the tip fall the black spots .Fix the screw on the top of headshell.
Advertisement
Table of Contents
Need help?
Do you have a question about the Consonance LT-1S and is the answer not in the manual?