Table of Contents
Advertisement
Troubleshooting
Perform the following actions.
If the problems still cannot be solved, contact the
store where you purchased the unit or a service
center authorized by Panasonic for repair.
Problem
The power switch
does not turn ON.
The shaving sensor
does not respond.
ES-LT6A_2A_CH.indb
39
Action
Unlock the switch lock.
(See page 30.)
Depending on the beard
thickness or the amount of
beard trimmings in the
shaver head, the shaving
sensor may not react and the
driving sound may not
change. This is not abnormal.
The shaving sensor may not
respond when the remaining
battery capacity is low. If this
happens, recharge the shaver.
Apply oil. (See page 37.)
The shaving sensor may not
respond when there is not
enough oil on the blades.
Problem
Clean the beard trimmings
from the shaver.
When the shaver is extremely
dirty, remove the foil frame
and wash with water.
(See page 14.)
The shaving sensor
responds even though
Replace the system outer
the shaver is not in
foil and/or inner blades.
contact with the skin.
Expected life of system
outer foil and inner blades:
System outer foil:
Inner blades:
Apply oil.
When the number of
Operating time is short
operations per charge starts
even after charging.
to decrease, the battery is
nearing the end of its life.
Action
Approximately 1 year
Approximately 2 years
39
2016/01/27
15:42:31
Advertisement
Chapters
Table of Contents
