Table of Contents
Advertisement
Section 4 - Configuration
If Enable DHCP-PD is disabled these additional parameters are available for configuration:
LAN IPv6 Address:
If DHCP-PD disabled or static address mode is selected, enter the LAN
(local) IPv6 address for the router.
LAN IPv6 Link-
Displays the router's LAN link-local address.
Local Address:
Advanced Settings - Address Autoconfiguration Settings
Enable Automatic
Enable or disable the Automatic IPv6 Address Assignment feature.
IPv6 Address
Assignment:
If DHCP-PD is enabled in LAN IPv6 Address Settings:
Enable Automatic
Enable or disable DHCP-PD for other IPv6 routers connected to the
DHCP-PD in LAN:
LAN interface.
Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing
for a larger address allocation), such as /63. Contact your ISP for more
information.
Autoconfiguration
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.
Type:
If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router
Enter the router advertisement lifetime (in minutes).
Advertisement
Lifetime:
D-Link DIR-1760 User Manual
PPPoE (continued)
46
Advertisement
Table of Contents
