Panasonic 9TGCF-P13 Operating Instructions Manual page 34

Connecting to Your Computer
9
At [Set up a Partnership], select the partnership and select [Next].
NOTE
To change the synchronization settings, tap, in order,
[Options...]. Be sure to disconnect the cable when changing the synchronization set-
tings.
Disconnect and connect the cable again if communications do not start.
For information about the Microsoft
Help.
CAUTION
While performing communications, avoid the following:
• Connect/disconnect the cable.
• Remove the computer from the cradle.
• Turn on/off the computer.
When Connecting the CF-P1 Directly with a Computer
Use a Connector Protector (optional: CF-VCCP11U) to
connect CF-P1 with an external device firmly.
Removing
34
® ®
ActiveSync , refer to the Microsoft
Expansion Connector of the CF-P1
USB Autosync Cable
or
Serial Autosync Cable
- [ActiveSync] - [Tools] -
®
ActiveSync
®