Selecting The Aspect Ratio According To The Video Signal - Sony VPL-GTZ280 Operating Instructions Manual

Selecting the Aspect
Ratio According to the
Video Signal
You can select an aspect ratio best suited for the video
signal received.
1
Press MENU to display the menu.
2
Press M/m to select the Screen
, or ENTER.
3
Press M/m to select "Aspect", then press , or
ENTER.
4
Press M/m to select the aspect setting (page 24).
Original image (for 16:9
display)
1.85:1
Squeezed 1.85:1
2.35:1
Squeezed 2.35:1
menu, then press
Recommended setting and
resultant images
1.85:1 Zoom
2.35:1 Zoom
Original image (for 16:9
display)
1.78:1 (16:9)
1.33:1 (4:3)
1.33:1 (4:3) with side panels
Squeezed
Notes
• Selectable aspect modes vary depending on the input signal
(page 41).
• When a computer signal is input, you cannot select the aspect
setting.
Notes on switching the "Aspect" setting
• Select the aspect mode taking into account that changing
the aspect ratio of the original picture will provide a
different look from that of the original image.
• Note that if the unit is used for profit or for public
viewing, modifying the original picture by switching the
aspect may constitute an infringement of the rights of
authors or producers, which are legally protected.
15
Recommended setting and
resultant images
Normal
Stretch