Table of Contents
Advertisement
-General
1
To view the OSD menu, press the joystick button at the bot-
tom of the monitor and then enter the Menu.
2
Go to
by moving the joystick.
General
3
Configure the options following the instructions that appear in
the bottom right corner.
4
To return to the upper menu or set other menu items, move the
joystick to ◄ or pressing (
5
If you want to exit the OSD menu, move the joystick to ◄ until
you exit.
Each option is described below.
Menu > General
Language
To choose the language in which the control names are displayed.
SMART ENERGY
High
SAVING
Low
Off
Power LED
Turns the power indicator on the front side of the monitor on/off.
On
Off
Automatic Standby
The monitor will automatically switch to standby mode after a certain period.
OSD Lock
Prevents incorrect key input.
On
All functions except for the OSD Lock mode and the Exit button for Brightness, Contrast, Volume, Input,
and General are disabled.
Off
NOTE
SMART ENERGY SAVING: Conserve energy by using luminance compensation algorithm.
y
Saving Data depends on the Panel. So,those values should be different from each panel and panel vendor.If op-
y
tion of SMART ENERGY SAVING is High or Low, monitor luminance become higher or lower depend on source.
/ OK) it.
Enables SMART ENERGY SAVING you can save energy with this energy- high efficient
function.
Enables SMART ENERGY SAVING you can save energy with this energy- low efficient
function.
Disables SMART ENERGY SAVING .
The power indicator is automatically turned on.
The power indicator is automatically turned off.
Key input is disabled.
NOTE
Key input is enabled.
Description
21
Advertisement
Table of Contents
