[General] - LG 24MR400-WB Owner's Manual

[Settings] > [Picture] > [Configuration Adjust] (D-SUB only)
•
[Horizontal]: To move image left and right.
•
[Vertical]: To move image up and down.
•
[Clock]: To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size
will also change.
•
[Phase]: To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or
sharpen the image of characters.
[Settings] > [Picture] > [Resolution] (D-SUB only)
•
User can set the desired resolution. This option is enabled only when the screen resolution on your computer
is set to the following (D-SUB only).
- 1024 x 768, 1280 x 768, 1360 x 768, 1366 x 768, off
- 1280 x 960, 1600 x 900, off
- 1440 x 900, 1600 x 900, off
[Settings] > [Picture] > [Picture Reset]
•
Returns picture and colour to the default settings.
18

[General]

[Settings] > [General]
• [Language]: Sets the menu screen to the desired language.
•
[SMART ENERGY SAVING]: Conserve energy by using luminance compensation algorithm.
- [High]: Saves energy using the high-efficiency [SMART ENERGY SAVING] feature.
- [Low]: Saves energy using the low-efficiency [SMART ENERGY SAVING] feature.
- [Off]: Disables the feature.
- The value of energy saving data may differ depending on panel and panel suppliers.
- If you select the option of [SMART ENERGY SAVING] is [High] or [Low], monitor luminance become higher
or lower depend on source.
•
[Automatic Standby]: If there is no operation on the monitor for a certain period of time, the monitor will
automatically switch to standby mode.
•
[OSD Lock]: This feature disables the configuration and adjustment of menus.
All features are disabled except [Brightness], [Contrast], [Volume] in [Quick Settings], [Input], [OSD Lock] and
[Information] in [General].
• [Information]: The following display information will be shown; [Total Power On Time], [Resolution].
•
[Reset]: Returns to the default settings.