Overview - Bosch MUM56 Series Operating Instructions Manual

en
Overload protection
If the motor switches itself off while the
appliance is being used, the overload protection
feature has been activated. A possible cause
may be that too much food was processed
at one time.
If a safety system is activated, see
"Troubleshooting".
Explanation of the symbols on the
appliance or accessory
Follow the instructions in the
instructions for use.
Caution! Rotating blades.
Caution! Rotating tools! Do not put
fingers in the feed tube.

Overview

Please fold out the illustrated pages. Fig. 
Base unit
1 Release button
2 Swivel arm
"Easy Armlift" function to support
the upward movement of the arm
(see "Work positions").
3 Rotary switch
When the appliance has been switched
off (position 0/off), the appliance runs
automatically to the optimum position
for changing the tools.
MUM52..:
0/off = Stop
M = Pulse switch at maximum speed, grip
switch for required blending duration.
Settings 1–4, Operating speed:
1 = low speed – slow,
4 = high speed – fast.
MUM54../MUM56..:
0/off = Stop
M = Pulse switch at maximum speed, grip
switch for required blending duration.
Settings 1–7, Operating speed:
1 = low speed – slow,
7 = high speed – fast.
14
4 On/Off display (MUM54../56..)
Is lit while the appliance is operating (rotary
switch on M or 1–7).
Flashes if the appliance has been operated
incorrectly, the electronic fuse has tripped or
the appliance is defective – see section
entitled "Troubleshooting".
5 Drive for
– continuous-feed shredder and
– citrus press (special accessory *).
When not in use, attach the drive cover.
6 Drive cover
To remove the drive cover, press on the rear
area and remove cover.
7 Drive for tools (stirrer, whisk, kneading
hook) and mincer (special accessory *)
8 Drive for blender (special accessory *)
When not in use, attach the blender drive
cover.
9 Blender drive cover
10 Cord store
MUM52../MUM54..: Stow the cord in the
cord store.
MUM56..: Automatic cord winder
Bowl with accessories
11 Stainless steel stirring bowl
12 Lid
Tools
13 Stirrer
14 Whisk
15 Kneading hook with dough deflector
16 Accessories bag
For storage of the tools and cutting discs.
Continuous-feed shredder
17 Pusher
18 Cover with filling shaft
19 Cutting discs
19a Reversible slicing disc – thick/thin
19b Reversible shredding disc – coarse/fine
19c Grating disc – medium-fine
20 Drive shaft with driver
21 Housing with outlet opening
*
Blender
22 Blender jug
23 Lid
24 Funnel
* If an accessory is not included in the product
package, it can be purchased via the trade or
customer service.
Robert Bosch Hausgeräte GmbH