Savin 2235 Operator's Manual page 55

AdonisC2_ENcopy122F_FM.book Page 42 Thursday, February 15, 2001 3:23 PM
Copying
- Rotated copy -
- -
If the direction in which your original is set (landscape or portrait) is different
from that of the paper you are copying onto, this function rotates the original im-
age by 90° and fits it on the copy paper. This function works when Auto Paper
Select or Auto Reduce/Enlarge is selected. ⇒ "Auto Paper Select" in P.40 "Se-
lecting Copy Paper" and ⇒ P.43 "Auto Reduce/Enlarge".
2
Original Paper
Orientation Orientation
R
Limitation
❒ The default setting for "Auto Tray Switching" is "With Image Rotation" You
cannot use the Rotated Copy function because this setting is changed to
"Without Image Rotation" or "Off".
❒ You cannot use the Rotated Copy function when enlarging onto B4 or A3 size
paper. In this case, set your original in the landscape direction.
You cannot
rotate:
However,
you can ro-
tate:
❒ You cannot use the Rotated Copy function when "Top Slant", "Left 2" or
"Saddle Stitch" is selected for stapling or if the Punch function is selected
when using the 2 Tray finisher. ⇒ P.50 "Staple" and ⇒ P.56 "Punch".
❒ You cannot use the Rotate Copy function if the Staple function is selected
when using the 1000-sheet finisher.
42
Copy
Orientation
GCROTA0E
Original Size and Direction
A4,
B5, or
A5
por-
trait
GCROTA1E
A4,
B5, or
R
A5
land-
GCROTA3E
scape
Copy Paper Size and Direction
When enlarg- B4, A3
ing to →
When enlarg- B4, A3
ing to →
R
GCROTA2E
R
GCROTA4E